Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.1
Installing clip
2
Install the clip prior to initial start-up.
▶ Push the clip into its mounts until the clip snaps into engagement.
Make sure that the holder for the shoulder strap is facing up.
5.2
Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 15
5.3
Inserting the battery
WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.
5.4
Removing the battery
1. Press the battery release button.
2. Remove the battery from the product.
5.5
Changing the filter bag
1. Switch the appliance off.
2. Open the two catches.
3. Lift the suction head off the waste material container.
4. Remove the filter bag and remove the holder for the filter bag.
5. Push the holder for the filter bag on to a new filter bag.
6. Secure the holder with the filter bag to the ribs of the waste material container.
7. Set the suction head on the waste material container and close the two catches.
5.6
Connecting/disconnecting the suction hose
1. Connect the suction hose to the suction hose intake socket.
▶ The suction hose should be heard to engage.
2. To disconnect the suction hose, press and hold down the EJECT button.
3. Disconnect the suction hose from the suction hose intake socket.
6
Types of work
WARNING
Risk of injury !
▶ Use of this product to pick up hazardous dusts is not permissible.
▶ Use this product only for dry applications.
18
English
3
2284803
*2284803*
Werbung
Inhaltsverzeichnis
