Error Messages - Wohler IR Temp 310 Bedienungsanleitung

Error Messages

15 Error Messages
Error Message Error
The temperature
being measured
is outside of the
settings of HAL
and LAL.
Hi /Lo The temperature
being measured
is outside of the
measurement
range of the
meter.
Er2 The meter is
exposed to rapid
changes in the
ambient temper-
ature.
Er3 T
ambient
(32°F) or
T
ambient
(122°F)
Er 5 to 9
44
Measure
The meter should be allowed
plenty of time (minimum 30
minutes) to stabilize to the
working/room temperature.
< 0°C
> +50°C
Reset: Turn the meter off,
remove the battery and wait
for 1 minute, reinsert the
battery and turn on.
Send the device in for repair
if the error message still
appears after the reset.