Ec Declaration Of Conformity - Makita AF500HP Betriebsanleitung

ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Nails
• Air hoses
• Safety goggles
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 80 dB (A)
sound power level: 93 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration value
is not more than 2.5 m/s
Uncertainty (K): 1.5 m/s
These values have been obtained according to EN792.
EC-DECLARATION OF CONFORMITY
Model; AF500HP
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN792 in accordance with Council Directives, 98/37/EC.
Tomoyasu Kato
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
2
2
CE 2008
Director
ENG045-2
ENH013-7
11