Icy Box IB-382H-C31 Handbuch Seite 9

1. Connect the power supply to the power supply connection (1.) of the IB-382H-C3 1.
2. Connect the power supply of the IB-382H-C3 1 with a standard 230 V EU socket.
3. Connect the USB Type-C
IB-382H-C3 1 (3.).
Attention! The cable must be connected to the Type-C
enclosure marked „PC".
4. Connect the USB cable to your host computer.
5. Now set the ON/OFF switch (2.) to „ON". The IB-382H-C31 including the installed
HDD/SSD will now be automatically recognized by the operating system.
6. Connect your USB devices to the 1x USB Type-C
as required.
Manual IB-382H-C31
1 2 3
to USB Type-C or the USB Type-C
® ®
ON
OFF
4 5
to USB Type-A cable to the
®
connector (3.) of the
®
(4.) and 2x USB Type-A (5.) connectors
®