Nibe ELK 15 Installateurhandbuch Seite 24

Caution
"start additional heat" in the menus 5.3.6 (external
step-controlled additional heat) and 4.9.3 (degree
minute settings internal additional heat) are fact-
ory set at 400DM. If both of the additional heat
options are used and you want to have more steps,
the start difference needs to be changed in one
of the menus.
Menu 5.6 - forced control
Forced control of the different components in the heat pump
as well as in the different accessories that may be connec-
ted.
• EB1-AA5-K1: Activating additional step 1.
• EB1-AA5-K2: Activating additional step 2.
• EB1-AA5-K4: Activating the circulation pump (GP10).
Caution
Linear stepping of ELK 15 is recommended.
F1145, F1155, F1245, F1255, VVM 225, VVM 310,
VVM 320, VVM 325 and VVM 500
Information about menu settings for the products above is
in the manuals for AXC 40, DEH 310 and DEH 500.
Menu 5.2 - system settings
Activating/deactivating of accessories.
Dimensions
All dimensions in mm.
24 Kapitel 6 | Technical data
Select: "step controlled add. heat".
Menu 5.3.6 - step controlled add. heat
Here you can perform the following settings:
• Select when the addition is to start.
• Set max permitted number of additional steps.
• If binary stepping is to be used.
Caution
"start additional heat" in the menus 5.3.6 (external
step-controlled additional heat) and 4.9.3 (degree
minute settings internal additional heat) are fact-
ory set at 400DM. If both of the additional heat
options are used and you want to have more steps,
the start difference needs to be changed in one
of the menus.
Menu 5.6 - forced control
Forced control of the different components in the heat pump
as well as in the different accessories that may be connec-
ted.
• EB1-AA5-K1: Activating additional step 1.
• EB1-AA5-K2: Activating additional step 2.
• EB1-AA5-K4: Activating the circulation pump (GP10).
See the "General" section on page17 to see which accessory
is required for your product.
NIBE ELK 15