Caretero Toyz CUATRO Bedienungsanleitung Seite 13

5
8
7
To install the front wheels put on the axle rods in turn: 12mm spacer (1), sleeve (2), wheel (3), sleeve
(2), hubcap (4), 10mm spacer (5), screw on the 10mm lock nut (6) with the included spanner (8) and
secure with the wheel cap (7).
To install the rear wheels, put the rear axle (9) through the hole in the car body, put on the wheel (3),
sleeve (2), hubcap (4), 10mm spacer (5), tighten the 10mm lock nut (6) using the included wrench (8 )
and secure with the wheel cap (7).
6
Connect the cables in the
compartment under the seat
properly.
7
9
3
7
4
Connect the cable extending from the handlebar to the
corresponding cable extending from the car body (1).
Put the handlebar on the car body and screw the
steering wheel with 5 * 32 machine screw (2). Install
the seat (3) in the car body and screw it with the
self-tapping screw 4 * 16 (4).
8
7
1
2
7
13