Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding of wood, plastic,
metal, filler and varnished surfaces.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Complete dust box (Microfilter system)
(3) Sanding pad
a)
(4) Sanding sheet
(5) Handle (insulated gripping surface)
(6) Extraction outlet
(7) Locking lever for dust box
(8) Filter element (Microfilter system)
(9) Screws for sanding pad
a)
(10) Dust extraction adapter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Random orbit sander
Article number
Rated power input
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding pad diameter
Choosing the Sanding Sheet
Select a sanding sheet with a grit suitable for how much material you want to remove. Bosch sanding sheets are suitable for
paint, wood and metal.
Use
Sanding down
– Coarse sanding work with a
high material removal rate
(coarse sand-
ing)
– Removing old paint
1 609 92A 84C | (08.07.2022)
Random orbit sander
Weight according to EPTA-
Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted sound pressure level of the power
tool is 77 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
determined according to EN 62841-2-4:
a
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
PEX 220 A
Implement additional safety measures to protect the oper-
3 603 C78 0..
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
W
220
and organising workflows correctly.
-1
min
12,000
-1
min
24,000
Assembly
mm
2.5
u
mm
125
Application
– Sanding down old paint, varnish and filler
– Removing thin paint
– Pre-sanding rough, unplaned surfaces
(triax vector sum) and uncertainty K
h
2
2
= 4.5 m/s
, K = 1.5 m/s
,
Pull the plug out of the socket before carrying out any
work on the power tool.
PEX 220 A
kg
1.2
/ II
Grit
Extra
40
coarse
Coarse
60
Bosch Power Tools
Werbung
Inhaltsverzeichnis
