Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
T4
T4
Loosen the axel nuts and gasket slightly from the front wheel.
Place the front wheel in the middle of the front fork.
Attention: The gasket and nuts should be together, not apart.
Use tools (T4 ) to lock the opposite locking screws on both
sides at the same time.
WARNING:
The axel nuts are already attached to the correct torque of
10.5N.m.Failure to tighten can cause the front wheel to get
lose while riding, causing injury to the rider or to others.
7
Werbung
