Before Use; Parts And Accessories - Braun MultiQuick 9 Bedienungsanleitung

English

Before use

Please read the user instructions carefully
and completely before using the appliance
and retain for future reference. Remove all
packaging and labels and dispose them appropriately.

Parts and Accessories

1 imode selector
a high speed
b low speed
c pulse
2 Safety button
3 Smartspeed switch / variable speeds
4 Motor part
5 EasyClick Plus release buttons
6 ActiveBlade shaft
7 Beaker
8 Whisk accessory
a Gearbox
b Whisk
9 Puree accessory
a Gearbox
b Puree shaft
c Paddle
10 350 ml chopper accessory «hc»
a Lid
b Chopping blade
c Chopper bowl
d Anti-slip rubber ring
11 500 ml chopper accessory «mc»
a Lid (with gear)
b Chopping blade
c Ice blade
d Chopper bowl
e Anti-slip rubber ring
12 1250 ml chopper accessory «bc»
a Lid (with gear)
b Chopping blade
c Ice blade
d Chopper bowl
e Anti-slip rubber ring
13 Coffee and Spice Grinder accessory
a Lid with coupling
b Grinder knife
c Bowl
d Anti-slip-base / lid
14 Stand for storing
How to Use the Appliance
Smartspeed Switch for
Variable Speeds
One squeeze, all speeds. The more you press, the
higher the speed. The higher the speed, the faster
and finer the blending and chopping results.
One handed operation: the Smartspeed switch (3)
allows you to turn on the appliance and control the
speed with one hand.
Switching On (A)
The appliance comes with an imode selector (1)
and a safety button (2) for releasing the
Smartspeed switch (3). Please follow the instruction
to start the appliance:
• By pressing the silver part of the top you can
choose one of the 3 different imodes (high
speed, low speed, pulse).
• After choosing the mode, press the safety button
(2) with your thumb.
• Immediately press the Smartspeed switch and
adjust to the desired speed.
NOTE: If the Smartspeed switch is not pressed
within 2 seconds, the appliance cannot be
switched on for safety reasons. The safety button
light will flash red. To switch the appliance on,
start again.
• During operation you do not need to keep the
safety button pressed.
Pilot light
Safety button
light Flashing red
Safety button
light off
Standby mode
after 10 minutes.
All lights switch
off.
Safety button light
solid red and
imode selector
lights are all
flashing
ActiveBlade Shaft (B)
The hand blender is equipped with an ActiveBlade
shaft, which enables the knife extend to the bottom
of the bell. The adjustment is made automatically by
pressure required in blending tasks, especially
suited to mix hard foods e.g. raw fruits and
vegetables.
It is also perfectly suited for preparing dips, sauces,
salad dressings, soups, baby food, as well as
drinks, smoothies and milkshakes.
For best results, use the highest speed.
Appliance / Operating status
Appliance is ready for use.
Appliance is released (switch
release button is pressed) and
can be switched on.
Device is active again if any
button is pressed
Device is overheated. Let the
device cool down one hour. It
is ready for use again when
the imode selector light stops
flashing and the safety button
light flashes.
11