Hamron 604097 Bedienungsanleitung Seite 18

● Do a check of the winch cable for damage and wear regularly. Always
replace a worn or damaged winch cable.
Warning! Do not operate the product if the winch cable is worn or
damaged.
5.2 To replace the winch cable
1
Put the clutch knob in the disengaged position.
2
Pull out the winch cable until it is in the end position.
3
Remove the winch cable.
4
Attach a new winch cable to the winch cable holder on the winch
cable drum.
Warning! Only use approved spare parts recommended by the
manufacturer.
5
Push the "CABLE IN" button on the remote control to wind up the
winch cable.
6 Disposal
6.1 To discard the product
● Make sure that you follow local regulations when you discard the
product. Do not burn the product.
18
2022_001