Installing The Gps Aerial; Installation Notes; Parts Supplied - Pioneer SPH-DA01 Installationsanleitung

Section
03 Installation
If the tab interferes with installation,
you may bend it down out of the way.
Factory radio-mounting bracket
Truss head screw
or flush surface
screw
Be sure to use the
screws supplied
with this product.
18
Engb
Dashboard or console

Installing the GPS aerial

CAUTION
Do not cut the GPS aerial lead to shorten it
or use an extension to make it longer. Alter-
ing the aerial cable could result in a short cir-
cuit or malfunction and permanent damage
to this product.

Installation notes

! The aerial should be installed on a level sur-
face where radio waves will be blocked as
little as possible. Radio waves cannot be re-
ceived by the aerial if reception from the sa-
tellite is blocked.
Dashboard
! Take care not to pull the aerial lead when
removing the GPS aerial. The magnet at-
tached to the aerial is very powerful, and
the lead may become detached.
! Do not paint the GPS aerial, as this may af-
fect its performance.

Parts supplied

GPS aerial
Rear shelf
Double-sided tape