Precautions Before Installation; Installing This Product; Before Installing - Pioneer AVH-X3500DAB Installationsanleitung

Connecting an HDMI device
This product
Notes
For details concerning the operations of
HDMI device, refer to Operation Manual.
When you connect the High Speed
HDMI Cable, use the lock tie to fix it
®
securely.
For details, refer to Securing the High
Speed HDMI ® Cable on page 6.
8
En
Connecting the rear display
This product
Yellow (V OUT)
Rear audio
output
Mini pin plug cable
(sold separately)
RCA cables
(sold separately)
To audio inputs To video input
Rear display with
RCA input jacks
(sold separately)
■ When using a rear display con-
nected to rear video output
WARNING
NEVER install the rear display in a loca-
tion that enables the driver to watch the
video source while driving.
This product's rear video output is for con-
nection of a display to enable passengers in
the rear seats to watch the video source.
Installation
Precautions before
installation
CAUTION
Never install this product in places
where, or in a manner that:
— Could injure the driver or passengers
if the vehicle stops suddenly.
— May interfere with the driver's oper-
ation of the vehicle, such as on the
floor in front of the driver's seat, or
close to the steering wheel or shift
lever.
— To ensure proper installation, be
sure to use the supplied parts in the
manner specified. If any parts are not
supplied with this product, use com-
patible parts in the manner specified
after you have the parts' compatibil-
ity checked by your dealer. If parts
other than supplied or compatible
ones are used, they may damage
internal parts of this product or they
may work loose and the product may
become detached.
— Do not install this product where it
may (i) obstruct the driver's vision,
(ii) impair the performance of any of
the vehicle's operating systems or
safety features, including airbags,
hazard lamp buttons or (iii) impair
the driver's ability to safely operate
the vehicle.
— Never install this product in front of
or next to the place in the dashboard,
door, or pillar from which one of
your vehicle's airbags would deploy.
Please refer to your vehicle's owner's
manual for reference to the deploy-
ment area of the frontal airbags.

Before installing

Consult with your nearest dealer if instal-
lation requires drilling holes or other
modifications of the vehicle.
Before making a final installation of this
product, temporarily connect the wiring
to confirm that the connections are
correct and the system works properly.
Do not install this product in a position
where the opening of the LCD panel is
obstructed by any obstacles, such as the
shift lever. Before installing this product,
be sure to leave sufficient space so that
the LCD panel does not obstruct the shift
lever when it is fully opened. This may
cause interference with the shift lever, or
a malfunction of the mechanism of this
product.

Installing this product

■ Installation notes
Do not install this product in places
subject to high temperatures or humidity,
such as:
Places close to a heater, vent or air
conditioner.
Places exposed to direct sunlight, such
as on top of the dashboard.
Places that may be exposed to rain, such
as close to the door or on the vehicle's
floor.
Install this product horizontally on a
surface within 0 to 30 degrees tolerance
(within 5 degrees to the left or right).
Improper installation of the unit with
the surface tilted more than these toler-
ances increases the potential for errors
in the vehicle's location display, and
might otherwise cause reduced display
performance.
30°
When installing, to ensure proper heat
dispersal when using this unit, make sure
you leave ample space behind the rear
panel and wrap any loose cables so they
are not blocking the vents.