Zipro One S Gold Bedienungsanleitung Seite 23

EN
Slide the nut of the upper
resistance adjustment cable
(13) into the slot in the bracket
of the lower resistance
adjustment cable (34), pull
and tighten the upper cable
(13) and move the lower cable
bracket (34) vertically. Cable
nut should be on the bracket
as shown in the picture.
Put the handlebar column (12) on the main frame (29) and fix it with Allen bolts (9) and curved
washers (10).
3. Mount the handlebar
Fix the handlebar (18) to
the handlebar column (12)
using hexagonal bolts (65)
and nuts (64), and then fix
the plastic handlebar cap
(66).
Take the cable plug (67) out
of the handlebar column
(12), run it through the
heart rate cable opening,
and then lock the plug (67).
Connect computer cables (17b) with the heart rate measurement cables from the handlebar (B1)
and the resistance adjustment cable (A1), to the computer cable (17a). Fix the computer (17)
vertically to the bracket in the handlebar column (12) with the bolt (16).
23