Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. CONNECTION AND OPERATION
3.1 Installation Checklist
Installation with a surge protector is recommended to protect the equipment
Check for nearby AC outlets for the power adapters
Directly connect to a Cat 6 cable, do not use with an active hub, network switch or
router
Cat 6 cable is recommended for 4K 60Hz up to 200 feet
Cat 5e cable reduces the connection distance and is not recommended for 4K video
Use shielded Cat 6 cable in a noisy area with EMI/RFI electromagnetic interference
IR cables require line-of-sight with the source equipment and an IR remote
Power-off all source and display equipment before connecting
Recommended HDMI cable distance In/Out: 15/15ft (4K) and 25/25ft (HD)
4K HDR displays require 4K-rated HDMI 2.0 cables (2 are included)
Test the Extender and cables before installing in a permanent location
3.2 Transmitter Panel Connections
1) Video IN: Connect to HDMI video source
2) Video Local: Connect a local display with HDMI
3) DC 12V: Threaded locking barrel port for power adapter
1) UPDATE: Micro-USB port for firmware update (if needed)
2) EDID: Switch to configure EDID settings
3) IR-T: 3.5mm port for IR blaster cord
4) CAT 6 OUT: RJ45 port for Cat 6 cable
18Gbps Audio/Video Extender over Cat 6
1
1
2
3
www.cablematters.com
3
2
3
4
Werbung
Inhaltsverzeichnis
