Tesla Smart TRV Style Bedienungsanleitung Seite 9

1) Press the knob and hold on for more than 3 seconds.
2) A symbol appears to indicate that the child
lock has been enabled. Repeated operation 1 will
un-enable the child lock function.
5.4 Installation of Tesla Smart APP
Scan the QR code as below, get and install Tesla Smart
APP for IOS and Android system.
Tesla Smart APP
5.5 Set gateway of Tesla Smart
After installing Tesla Smart APP, it is necessary to
operate the network-setting of the Tesla Smart
ZigBee Hub.
1) Login the APP after registration
2) Click 'Add Device'
3) Select 'Tesla Smart ZigBee Hub'
4) Make sure the LED is always on and click to next
5) Wait and until next Interface appears
6) Finished
5.6 Add into Tesla Smart
In standby mode, the thermostat will enter the mat-
ching mode by pressing the knob three times quickly.
Matching process is limited to 2 minutes, cannot be
interrupted halfway and then automatically withdraw.
9