Tesla Smart TRV Style Bedienungsanleitung Seite 5

1) Press the knob and hold on for 3 seconds before the
product be installed on the valve.
2) Until the appears and the symbol
flickers, there will be slight vibration at the same time.
3) Align the thermostat interface nuts to the radiator
valve. Then push forward slightly and turn the interface
nuts clockwise until tightening. The maximum torque
is 5N·m.
4) Press the knob again and appears.
5) After about 10 seconds, the symbol
disappears and the current temperature is displayed.
The installation is finished.
In order to minimize the influence of the radiator's
own heat on the thermostat, it is recommended to
install as follows.
5