Correct
4.3
Automatic detection
• When the thermostat is installed, the equipment
will be adjusted automatically according to the
heating system. During this process, you may find
that the thermostat is slow response or self-heating /
self-cooling. This is normal and is a necessary part of
the adjustment process.
• Thethermostatwillclosetheradiatorvalveataspecific-
time,andthenopens it again to detect the exact ope-
ning position of the valve. The automatic detection
function can make use of heat as efficiently as possi-
ble and control the temperature more accurately.
• Ifnecessary,pleasereloadthebatteryandactivatethein-
stallationmodeand manually run the automatic
detection function.
6