3. Press the "Start/+30sec./Confirm" but-
ton (18) again.
Preheating starts. The indicators
and the bar beneath the "9" will start
to flash.
During preheating, all bars will start to il-
luminate gradually from the bottom left of
the display (14) up to the 180 °C bar. This
shows the progress of the preheating.
Once the temperature has been reached,
2 signal tones will sound.
4. Place the dish in the cooking chamber (1)
and put the cake into the cooking cham-
ber (1).
5. Open the cooking chamber door (1) as
well if you have put the cake in the cook-
ing chamber at the beginning of the pre-
heating time.
6. Close the cooking chamber door (1) again
and press the "Start/+30sec./Confirm"
button (18).
The baking will then start. The time display
will count back in second intervals from
; the indicators
47: 3 0
180 °C bar will start to flash at the bottom
of the display (14).
The automatic programmes
and
and
and the
Page EN-27