Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Disabling the keyboard backlight
Activating the keyboard backlight
Automatic keyboard backlighting at the
press of a button
LED off during sleep mode
LED blinks during sleep mode
Notes:
1. The master code can be between 6 and 8 digits, the factory setting is 999 999.
2. The user ID number must be 4 digits long, the card number can be 6 to 8 digits long.
3. The PIN code is any combination of numbers consisting of 4-6 digits (excluding code 1234 which is reserved).
4. When registering the first user, the device will automatically generate PIN 1234 (PIN 1234 is not an access code for door opening).
5. If you enter an incorrect master code, the device will lock for 5 seconds and then return to standby mode. Enter the correct main code again. After entering the
correct code, the device will return to standby after 30 seconds.
6. When entering codes on the keypad, the "#" symbol means confirmation of the digits entered, when adding or removing new user cards "#" means confirmation of
adding or removing a user, while "*" means exit from the programming mode.
7. When adding a series of cards, the device automatically assigns a user ID and card number (this is the first free value), each subsequent card is the next free ID and
card number and so on until a certain number of cards have been added.
8. Please note that by resetting the device all settings will return to the factory settings.
9. When registering users in Zone 1, the LED on the device will light green, when registering Zone 2 users, the LED on the device will blink green.
Color
Red
Black
Yellow
Blue
Purple
Orange
Grey
White
Brown
Green
Pink
Pink
Operation status
Standby
Pressing the button
Read the card
Door 1 opening
Door 2 opening
Success of operations
Failure of the operation
PIN entering
PIN code & card reading
Multiple card reading
Menu entering
Settings entering
Main card reading
Exit programming mode
Administrator settings
Change the main code
Entering the administrator "add card"
Entering the administrator "delete
card"
Delete all users
Opening of lock 1 by the administrator
Opening of lock 2 by the administrator
User settings – Zone 1
Adding card user
Functions
Description
DC+
12VDC Input power
GND
Negative supply pole
OPEN1
Door request button 1 (other end connected to GND)
NO1
Door relay 1 NO contact (potential free)
COM1
Common contact for door open relay 1 (potential free)
NC1
Door relay 1 NC contact (potential free)
OPEN2
Door request button 2 (other end connected to GND)
NO2
Door relay 2 NO contact (potential free)
COM2
Common contact for door open relay 2 (potential free)
NC2
Door relay 2 NC contact (potential free)
Doorbell A
Doorbell A connection
Doorbell B
Doorbell B connection
Sound and light indication
Red light
blink
-
-
-
-
-
-
Light up
Light up
Light up
Light up
-
-
blink
Detailed programming manual
00
01
02
* Main code #
07
51
52
* Main code #
11
0 #
42
1 #
2 # (factory default)
0 #
43
1 # (factory default)
Wiring connection
Green light
-
-
Light up
Light up
blink
Light up
-
-
-
-
-
-
-
-
New code # New code #
The main code may contain from 6 to 8 digits. Factory setting: 999 999
Read Add Card
Read Delete Card
0000 #
Note: All Zone 1 and Zone 2 users will be deleted.
Read card # or
User ID number # Read card # or
9
Orange light
Buzzer
-
-
-
-
-
-
-
DiDiDi
-
-
-
-
Light up
Light up
-
-
Di
Di-
Di-
Di-
Di-
-
-
-
-
-
DiDi
Di-
Werbung
Inhaltsverzeichnis
