Dantherm ACT-7 Bedienungsanleitung Seite 9

Installation: Handling and set-up
Connecting room
Step Description
unit to heat
1
exchanger
2
3
4
!
5
Use the interconnecting line (5-30m)
to connect the ACT 7 room unit to the
heat exchanger.
NB: The interconnecting line should
be routed carefully to avoid any
possibility of kinking or unnecessary
restrictions to the flow of water. The
line will be more likely to kink when
warm.
Connect the condensate drain to the
ACT 7 room unit.
Connect the condensate drain to the
heat exchanger by pushing the clear
hose ends into the grey connector.
Connect the pipes to the
a. heat exhanger and
b. room unit
Pull the coupling of the female pipe
adapter back in order to connect the
pipes.
Be prepared with an old cloth or alike
to wipe the water/glycol mixture up,
since it will spill a bit, when the pipes
are connected.
a. Connect the heat exchanger
power cord to the ACT 7 room
unit using the socket provided.
b. Push the locking ring towards the
machine.
c. Turn locking ring clockwise to
lock the connection.
Repeat a + b + c when connecting the
power cord to the heat exchanger.
Illustration
a
b
a b
a
b
c
9