Use In The Cold; Maintenance And Cleaning - Meec tools 018762 Bedienungsanleitung

below for optimum battery life.
• Remove the battery from the charger as
soon as it is fully charged.
• Store the battery in a dry place at no more
than 27°C.
• The battery should be charged to at least
30–50% when put into storage.
• Charge the battery as usual if it has not
been used for 6 or more months.
Recycle used batteries in accordance with local
regulations.

USE IN THE COLD

• Keep the product as warm as possible
before use.
• Fire the product against a spare piece of
wood 5 or 6 times before use.

MAINTENANCE AND CLEANING

WARNING!
Remove the battery from the product and
remove all fasteners from the magazine
before inspection, maintenance and/or
cleaning.
CLEANING OF DUCT FOR FASTENERS
Problems driving and feeding fasteners can
be a result of glue residue from nail strips. If
this happens, clean the area around the drive
mechanism.
1. Remove the battery from the product.
2. Pull back the cover on the magazine and
remove the fasteners to access the duct.
3. Apply a little compressed air oil on a clean
cloth and wipe all the glue residue off the
duct.
4. Load fasteners into the magazine and
close the cover.
Cleaning
Do not use solvent on plastic parts, this can
damage the plastic. Remove any dirt, dust, oil
or grease with a clean cloth.
EN
37