Safety Instructions - Meec tools 018762 Bedienungsanleitung

SAFETY INSTRUCTIONS

The term "power tool" in all the warnings
below refers to mains-powered (corded) or
battery-powered (cordless) power tools.
WORK AREA
• Keep the work area clean and well lit.
Dark and cluttered work areas increase
the risk of accidents and injuries.
• Do not use power tools in explosive
environments, such as in the vicinity of
flammable liquids, gas or dust. Power
tools produce sparks that can ignite dust
and fumes.
• Keep children and onlookers at a safe
distance when using power tools. You can
easily lose control of the tool if you are
distracted.
ELECTRICAL SAFETY
• The plug on the power tool must match
the power point. Never modify the plug in
any way.
• Never use an adapter with earthed power
tools.
• Unmodified plugs and matching outlets
reduce the risk of electric shock.
• Avoid body contact with earthed surfaces
such as pipes, radiators, cookers and
refrigerators. There is an increased risk of
electric shock if your body is earthed.
• Do not expose power tools to rain or
moisture. There is a greater risk of electric
shock if water gets into a power tool.
• Never use the power cord to carry or pull
the machine, or to pull out the plug from
the power point. Keep the power cord
away from heat, oil, sharp edges and
moving parts. Damaged or tangled power
cords increase the risk of electric shock.
• If using the tool outdoors, only use an
extension cord approved for outdoor use.
Cords intended for outdoor use reduce the
risk of electric shock.
• If it is absolutely necessary to use the
power tool in damp conditions, use a
mains connection protected by a residual
current device RDC. A residual current
device reduces the risk of electric shock.
PERSONAL SAFETY
• Stay alert. Pay attention to what you are
doing, and use your common sense when
working with power tools. Never use
power tools if you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention when using a
power tool can result in serious personal
injury.
• Use personal safety equipment. Wear
safety glasses. Depending on the type of
power tool and how it is used, safety
equipment such as dust masks, non-slip
safety shoes, safety helmets and ear
protection reduce the risk of personal
injury.
• Avoid accidental starting. Make sure the
power tool is switched off before plugging
in the power cord and/or battery, or
lifting/carrying the tool. Carrying a power
tool with your finger on the switch, or
connecting a tool to the mains when the
switch is in the ON position, increases the
risk of accidents.
• Remove adjuster keys/spanners before
switching on the power tool. Allen keys, or
the like, left in a rotating part of a power
tool can cause personal injury.
• Do not overreach. Always maintain a firm
footing and good balance. This ensures
better control over the power tool in
unexpected situations.
• Wear suitable clothing. Do not wear
loose-fitting clothing or jewellery. Keep
your hair, clothing and gloves away from
moving parts. Loose-fitting clothing,
jewellery and long hair can get caught in
moving parts.
• If dust extraction and dust collection
EN
31