Technical Data - Meec tools 018762 Bedienungsanleitung

EN
Recycle discarded product
in accordance with local
regulations.
Wear safety glasses.
Use ear protection.

TECHNICAL DATA

Battery charger
Input voltage
Firing frequency
Magazine
Firings per charge
Charging time
Weight
Type of fasteners
Length of fastener
Sound pressure level, LpA: 83 dB(A), K= 3 dB
Sound power level, LwA:
Vibration level:
Always use ear protection!
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and
for a preliminary assessment of exposure. The
measurement values have been determined in
accordance with EN 60745-2-16:2010.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
34
220 V AC, 60 Hz
18 V DC, 2 Ah
30/minute
100
700
45 minutes
2.8 kg
Nails 18 GA
Staples 18 GA 1/4"
Nails 3/4" - 2"
Staples 15 - 125 mm
94 dB(A), K= 3 dB
2.2 m/s2, K=1.5 m/s2
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
FIG. 1
1. Knob for depth setting
To adjust the driving depth.
2. Safety element
3. LED work light
Lights up the workspace.
4. Status light
Warns the user of discharged battery and
empty magazine, and if fasteners have
jammed.
5. Selector for firing method
To set push firing/single firing
6. Magazine of hardened aluminium
7. Belt hanger
8. Lithium-ion battery
USE
HOW TO USE BELT HANGER
FIG. 2
1. Release the belt hanger by turning the
screw anticlockwise with a screwdriver.
2. Turn the belt hanger to the required
position.
3. Tighten the screw to lock the belt hanger
in place.