Kenwood JE850 Bedienungsanleitungen Seite 5

Appliances can be used by persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and if they
understand the hazards involved.
Only use the appliance for its intended
domestic use. Kenwood will not accept
any liability if the appliance is subject to
improper use, or failure to comply with
these instructions.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the appliance.
This appliance conforms to EC
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
before using for the first
time
Wash the parts: see 'care and
cleaning'.
key
pusher
extra large feed tube
lid
filter
filter holder
anti-drip spout
interlock latches
lid with foam separator
juice jug
power unit
on/off speed control
pulp collector
pulp collector catch
filter brush
cord storage
using your juicer
assembly and use
1 Fit the filter holder
2 Fit the filter
holder.
3 Fit the lid. Lock the lid by clipping
the top of the latches
lid. Then snap the bottom of the
latches
4 Slide the pulp collector into
position.
Your juicer will not operate
if either the pulp collector or
lid are not fitted correctly.
5 Fit the anti-drip spout
filter holder and turn to the juicing
position
a = juicing position
b = anti-drip position.
6 Put the juice jug under the outlet.
The foam separator in the jug
ensures that the juice is free from
foam.
7 Use the recommended usage
chart as a guide for juicing different
fruits and vegetables.
8 Switch on
items down with the pusher –
ensuring the groove in the pusher
aligns with the notch on the inside
of the feed tube.
3
.
inside the filter
to the
into place.
to the
uppermost.
and feed the food