DRESSER RB 4700 Inbetriebnahmeanleitung Seite 7

·
The device must be cleaned with a wet cloth only, please don't use solvent or alcohol containing products
·
The device is not appropriate for floods and loads by earthquakes
·
The pressure has to be completely
The rest of gas can withdraw, therefore the required ventilation has to be insured
·
The appropriate measures for noise reduction have to be seized depending on the installation
place and work conditions
·
The gas pressure reduction stations have to be fitted with safety devices, which must prevent
any exceed of the maximum allowable in the downstream network pressure
·
The gas pressure regulators have to be adjusted in such way, that the maximum allowable
pressure in the downstream network is not exceeded The accuracy class has to be taken to
consideration as well
INSTRUCTIONS FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX):
·
If film of rust is possible (flying rust in the immediate product surroundings), all outer aluminum parts shall
be protected appropriately (eg by varnish)
·
The product must be electrically connected to adequately earthed installation
·
For installation, removing or repair of the product on site, only tools allowed for the corresponding explosion
area can be used
·
The product shall not be exposed to flames, ionized radiation or ultrasound
discharged before to take the device from the pipe line
7