Eu Declaration Of Conformity - Dresser Rb 4700 Inbetriebnahmeanleitung

Manufacturer:
Applied conformity assessment
procedures PED:
Applied standards and technical
specification:
Other applied EC-Directives:
Engaged notified body:
Module D, Surveillance of the QS-System: TÜV SÜD Industrie Service GmbH, Westendstraße 199, D-80686 München
Module B, EC type examination certificate: DVGW CERT GmbH, Josef-Wirmer Straße 1-3, D-53123 Bonn
Examination/inspections/tests
during manufacturing:
Surveillance of the QS-System:
EC type examination certificate No:
Regulators and safety devices according to EN 334 and EN 14382 - if not equipped, with any electronic device – do not have a
potential ignition source and therefore are not in the scope of European directive 2014/34/EU
4
D2036026_AC_EU_Declaration_RB4700D.docx

EU Declaration of Conformity

gas pressure regulators for natural gas and all non-corrosive gases
with or without safety shut-off valves for OPSO or OPSO and UPSO
Itron GmbH, Hardeckstraße 2, D-75185 Karlsruhe
Declares under his sole responsibility, that the regulator
RB4710D / 4720D / 4730D without SSV
RB4712D /4722D / 4732D with SSV8600
is in conformity with the Gas Appliance Regulation EU/2016/426
and the Pressure Equipment Directive 2014/68/EU
The regulator without SSV has been classified as pressure accessory in category II.
The regulator with SSV has been classified as safety accessory in category IV, by the
manufacturer. The used fluids are classified in group 1 according article 13.
Module B + D
DIN EN 334:2005+A1:2009 and DIN EN 14382:2005+A1:2009+AC:2009
2014/30/EU, electromagnetic tolerance
- EN 61000-6-2 (2016); EN61000-6-3 (2006 + A1:2010), EN 60947-5-2 (2014)
2011/65/EU, RoHS
- EN 50581 (2012)
only for optional electronic device
TÜV SÜD Industrie Service GmbH, Westendstraße 199, D-80686 München
DGR-0036-QS-955-17
CE-0085CN0360
Karlsruhe, April 21 , 2018
th
K. Zinnitsch
Managing director