Safety Instructions - Klarstein RENATA Bedienungsanleitung

SAFETY INSTRUCTIONS

• Before use, check the voltage on the device badge and connect the device only
to sockets which correspond to the voltage of the device. If you are not sure
whether your connections meet the requirements, consult an electrician or
your power supplier.
• Always turn the motor off before plugging the motor into an electrical outlet.
• To prevent electric shock, never completely immerse the base in water or
other liquids.
• If the power cord is damaged, it must be replaced by the manufacturer, an
authorized service center, or a similarly qualified person.
• Do not bend the power cord or allow it to hang over the work surface to
prevent it from getting caught.
• Do not place the appliance near open stoves, hot ovens, or easily flammable
materials such as curtains or textiles.
• Before use, place the appliance on a stable, level surface.
• Ensure that children do not play with the device.
• Place the device as close as possible to the power source so that you can pull
the plug quickly and easily if necessary.
• Check the power cord regularly for damage. Do not use the unit with the
power cord damaged.
• Only use the unit indoors and for the specified purpose.
• Keep children away from the unit and stow it out of the reach of children.
• Do not use the device without contents and only under supervision.
• Do not touch any moving parts with your hands during use.
• Keep the operating instructions and pass on the device only with the
operating instructions.
• Only use original accessories.
• Unplug the appliance from the wall outlet before cleaning or discontinuing
use.
• Switch off the appliance and disconnect the plug before changing or removing
any moving parts.
• The unit contains parts that are not accessible to the user. Do not remove any
covers and do not attempt to repair the unit yourself. Repairs may only be
carried out by qualified specialists.
• Do not connect the unit to multiple sockets, external timers or remotely
controlled sockets.
Note: The device is only designed for short-term operation, i.e. it should not be
operated continuously for more than 4 minutes. Then switch off the unit and let
the motor cool down before switching it on again.
EN
19