On/Off Switch - ABB PSTX30 Kurzanleitung

6.4: Navigation overview
The softstarter has 10 keys on the keyboard, see chapter 5 for details of
the key function.
Menu
Push to go to the menu and then use
Push to make your selection, see figure 1, graphics 14. The settings
in the HMI can be set with numerical setting, switch setting or selection list.
The numerical setting
Use the numerical setting when a numerical value is to be set in the
softstarter.
Use and
figure. Then push
Push , to save. See figure 2, graphics 14.

On/off switch

With the switch you can select 1 or 0 (on or off). Use
board highlights the selected switch. Then push
value of the selected switch. Push
Selection list
Use or
Push , to save.
See figure 4, graphics 14.
6.5: Parameters
Menu u Parameters
Push , Menu, to enter the menu. Use
and then push
• Complete list - Set parameters
• Favourites - Create your own parameter list
• Modified - All parameters that differs from default
You can find the most common parameters in table 6.7.
key to select a figure, a black board highlights the selected
or to change the value of the selected figure.
, a black board highlights the selected option.
, Select.
Softstarters Type PSTX30...PSTX1250 User Manual short form 1SFC132082M9901 13 Softstarters Type PSTX30...PSTX1250 User Manual short form
or to select a menu item.
and
or to change the
, to save. See figure 3, graphics 14.
or to select Parameters
14
, a black