Appendix B - OP Link TripleShield Benutzerhandbuch

V 2.2.0t1b

Appendix B

DHCP (Dynamic Host Configuration Protocol) setting of router
Fig.1 DHCP Setting of Router (Example of Router: 2wire 2701HG-B)
(1) Open a browser and enter your IP address, such as"192.168.X.X". You can find this address
on the back of the router.
(2) Log in to your router's account. Check your user manual or documentation if you do not
know the log-in credentials.
(3) Make sure you are in the Setup category, select 'Enable DHCP' and enter the address range
(from "192.168.1.100" to "192.168.1.199").
Oplink Communications, Inc.
24