OP Link TripleShield Benutzerhandbuch Seite 16

V 2.2.0t1b
detects motion, the LED will blink. This demonstrates that the sensor is working. LED flashing
during this hour does not always mean that an event has been triggered because of the 3-
minute cool-down period programmed into the sensor.
•
The Power-Save Mode starts after the first hour of installing a battery. The LED will blink only when
the Motion Sensor detects motion and when the motion is not within the programmed 3-minute
cool-down period.
*Notes:
- Do not aim the detector at a staircase which a pet has access to.
- Do not mount the detector near furniture or object higher than 4 feet tall which a pet may
climb onto (such as a couch within 6 feet of the motion sensor).
Oplink Communications, Inc.
15