Power Supply - HIKMICRO HM-TS03-15XF/W-L15 Schnellstartanleitung

Transportation
● Keep the device in original or similar packaging while transporting it.
● Keep all wrappers after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original wrapper. Transportation without the original wrapper may
result in damage on the device and the company shall not take any
responsibilities.
● Do not drop the product or subject it to physical shock. Keep the
device away from magnetic interference.

Power Supply

● Input voltage should meet the Limited Power Source (5 VDC, 2 A)
according to the IEC62368-1 standard. Please refer to technical
specifications for detailed information.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
● Use the power adapter provided by qualified manufacturer. Refer to
the product specification for detailed power requirements.
Battery
● The built-in battery cannot be dismantled. Please contact the
manufacture for repair if necessary.
● For long-term storage of the battery, make sure it is fully charged every
half year to ensure the battery quality. Otherwise, damage may occur.
● Use the battery provided by qualified manufacturer. Refer to the
product specification for detailed battery requirements.
● CAUTION: Risk of explosion if the battery is replaced by an incorrect
type.
● Improper replacement of the battery with an incorrect type may defeat
a safeguard (for example, in the case of some lithium battery types).
● Do not dispose of the battery into fire or a hot oven, or mechanically
crush or cut the battery, which may result in an explosion.
● Do not leave the battery in an extremely high temperature surrounding
8