Dell XPS 8950 Servicehandbuch Seite 70

Table 3. System setup options—System information menu (continued)
General-System Information
SLOT5_M.2
SLOT6_M.2
Processor Information
Processor Type
Core Count
Processor ID
Current Clock Speed
Minimum Clock Speed
Maximum Clock Speed
Processor L2 Cache
Processor L3 Cache
HT Capable
64-Bit Technology
Device Information
SATA-0
SATA-1
SATA-2
SATA-3
M.2 PCIe SSD-2
LOM MAC Address
Video Controller
Audio Controller
Wi-Fi Device
Bluetooth Device
Boot Sequence
Boot Sequence
Boot List Option
UEFI Boot Path Security
Always,Except Internal HDD
Always
Never
Date/Time
Table 4. System setup options—System Configuration menu
System Configuration
Integrated NIC
Enable UEFI Network Stack
70 System-Setup
Displays the PCI information of the computer.
Displays the PCI information of the computer.
Displays the processor type.
Displays the number of cores on the processor.
Displays the processor identification code.
Displays the current processor clock speed.
Displays the minimum processor clock speed.
Displays the maximum processor clock speed.
Displays the Processor L2 Cache size.
Displays the Processor L2 Cache size.
Displays whether the processor is HyperThreading (HT) capable.
Displays whether 64-bit technology is used.
Displays the SATA device information of the computer.
Displays the SATA device information of the computer.
Displays the SATA device information of the computer.
Displays the SATA device information of the computer.
Displays the M.2 PCIe SSD information of the computer.
Displays the LOM MAC address of the computer.
Displays the video controller type of the computer.
Displays the audio controller information of the computer.
Displays the wireless device information of the computer.
Displays the bluetooth device information of the computer.
Displays the boot sequence.
Displays the available boot options.
Enable or disable the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu. Default: Enabled
Enable or disable the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu. Default: Disabled
Enable or disable the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu. Default: Disabled
Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.
Controls the on-board LAN controller.
Enable or disable UEFI Network Stack.