Connecting The Usb Nano Receiver; Software Installation - Silvercrest SOML 807 A1 Bedienungsanleitung Und Serviceinformationen

The power for charging the battery is obtained from the
computer's USB port. Depending on your computer, the USB
power may be cut when the computer is powered off. In this
case, you may only charge the wireless mouse battery when
the computer is powered on.

Connecting the USB Nano Receiver

If you still have your old mouse connected to the computer, please shut down
your computer, disconnect the device from your PC and restart the computer.
Connect the USB Nano Receiver (12) to a free USB port of your running
computer.
The operating system will automatically recognize the new hardware and
install the required drivers. Depending on the operating system installed, the
following screen messages may appear:
®
Windows XP
When the receiver is connected for the first time, the operating system
displays the message „New hardware detected". Wait until the message
„The new hardware has been installed and is now ready for use" is
displayed before using your mouse.
®
Windows Vista , Windows
When the receiver is connected for the first time, the operating system
displays the message „Installation of appliance driver software". Wait until
the message „The appliances are ready for use now" appears. The mouse is
now operational and ready to be used.

Software Installation

If you would like to use all of the functions of your wireless mouse you need to
install the software included. Insert the included CD-ROM in the CD-ROM drive
of your computer. The installation process should start automatically, failing
that, start the CD-ROM file "Setup.exe" manually by double-clicking it.
Mouse with charging cradle SOML 807 A1
®
7
English - 49