Operation In Autonomous Mode; Compatible Detectors And Remote Control; Process Of A Call In The Event Of A Technical Defect - DELTA DORE TTRTC TYXAL+ Bedienungsanleitung

4. Operation in autonomous mode

The transmitter can operate in autonomous mode
without being associated with an alarm control unit.
In this case, the technical detectors (leak detector,
smoke detector, etc.) are directly associated with
the transmitter. A call is made if a technical defect
is detected.

4.1 Compatible detectors and remote control

DFR TYXAL+
Smoke, fire detector

4.2 Process of a call in the event of a technical defect

If a technical defect is detected, the telephone transmitter calls the recorded numbers
(6 max.) in turn until a contact stops the call cycle.
Example of when a contact picks up:
"You are
connected with
a telephone
transmitter"
Tamper alarm defect
04 April 2014
*
Example of room and zone name.
The message depends on the way
you have configured your installation.
You must press the
button before hanging up to
stop the call cycle so that
the transmitter does not call the
other numbers.
DU TYXAL+ DF TYXAL+
Universal Leak detector
detector
To view the defect details,
type 1
Tamper alarm on the living
room detector, zone 1,
on 22 04 2014.
To disable the product,
press 2
It is also possible to associate a
TL 2000 TYXAL+ remote control featuring the SOS
function to trigger an emergency call.
The remote monitoring and intercom functions are
compatible with this operating mode.
TYXAL+ DCS
Mains power failure
detector
1 2 3
4 5 6
7 8 9
0
*
1 2 3
4 5 6
7 8 9
0
41
TL 2000 TYXAL+
Remote control
To stop the call cycle,
press
1 2 3
4 5 6
7 8 9
0
#
*
From that point on, the
transmitter will no longer call
the other numbers.
- to listen, press 2
- to listen whilst talking,
press 3
- to disconnect the call,
press twice
EN