Wolkenstein WGSP15-8FI Bedienungsanleitung Seite 152

5. The programmable delay period is from 1 hour (min.) to 24 hours (max.).
6. Close the door of the appliance properly.
7. The set cleaning programme starts automatically after the set delay time has
elapsed.
If the selected cleaning programme cannot be combined with the desired
programme function(s), these functions cannot be selected or will be cancelled
and the indicators switches off automatically.
❖ The programme function « H
programmes.
❖ Select this programme function if you have only loaded one dish rack (upper or
lower dish rack). You can use the « H
whether the cleaning programme is activated only for the upper or only for the
lower dish rack.
❖ The running time of the set cleaning programme can be reduced by this
programme function.
NOTICE! Do not use this programme function when the dishwasher is
fully loaded, otherwise the cleaning effect of the appliance will be
reduced.
The programme function « H
programmes (see also chapter 6.1 T
H
❖ Select this programme function if you have only loaded the upper dish rack.
1. Switch on the appliance using the « O
2. The appliance is now in
3. Set the desired cleaning programme using the « P
4. To activate the programme function « H
the set cleaning programme, press the « H
repeatedly until the operational status indicator of this function goes on:
(« »).
5. The programme function « H
Only the upper spray nozzle operates. The lower spray nozzle does not operate.
P
ROGRAMME FUNCTION
ALF LOAD
OW TO ACTIVATE THE PROGRAMME FUNCTION
« H L
ALF OAD
STANDBY MODE
ALF
: « H
ALF LOAD
» can be set for some cleaning
ALF LOAD
» -
ALF LOAD
» may not be available for all cleaning
HE ADDITIONAL PROGRAMME FUNCTIONS
/
UPPER DISH RACK
/ O » -
N FF BUTTON
.
ROGRAMME
L
ALF OAD
ALF LOAD
L /
OAD UPPER DISH RACK
»
(« ») to select
BUTTON
»
.
» -
BUTTON
/
UPPER DISH RACK
» -
BUTTON
» is activated.
).
.
» for
(« »)
~ ~
152