Ordering Replacement Parts; Disposal And Recycling; Storage And Transport - EINHELL GC-CG 18 Li Originalbetriebsanleitung

7.3 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.

9. Storage and transport

Remove the battery. Store the tool and its acces-
sories in a dark, dry and frost-free place. The ide-
al storage temperature is between 5 and 30 °C.
Store the electric tool in its original packaging.
•
Always carry the tool by its handle.
•
Secure the tool against slipping if you trans-
port it in a vehicle.
•
As far as possible, use the original packaging
for transporting the tool.
•
Use a transport guard for the grass and shrub
shears.
10. Faults
The tool does not work
•
Check that the battery is charged (press but-
ton "B" on the battery) and that the charger is
working.
•
Check that the battery is pushed fully into the
battery mount and is latched in position.
If the tool will not work in spite of the voltage
supply being OK, please send it to the customer
service address provided.
Anl_GC_CG_18_Li_SPK13.indb 19 Anl_GC_CG_18_Li_SPK13.indb 19
GB
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
Please note that batteries and lamps (e.g. light
bulbs) must be removed from the tool before it is
disposed of.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the Einhell Germany
AG.
Subject to technical changes
- 19 -
01.06.2022 13:37:22 01.06.2022 13:37:22