Herunterladen Inhalt Inhalt Diese Seite drucken

Ironing; Using The Appliance For Ironing . Pag - Lavor GV EGON VAC Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 82
10.1 Using the appliance for ironing
Plug the power cable (B) into the socket.
Lift the safety cover (V).
Plug the iron plug (34) into the socket (W) (Fig. 44)(Fig. 45).
If the flex (1) is inserted, first remove the quick connector (27)
of the flex by pressing the front button (28).
Please refer to the chapter "Starting up the boiler" before use.
Press the main switch (D) and the boiler switch (E); the boiler
switch pilot light (I) will come on. Now the water will be
heated to create the steam. Pre-select the required steam
power by using the steam adjustment knob (J) on the
appliance. The gauge (K) indicates the level of pressure inside
the boiler; the grey/silver area indicates the ideal pressure for
use. Adjust the required temperature with the knob (37)
located on the iron (Fig. 46).
The luminous button (36) will indicate that the soleplate of the
iron is heating up (Fig. 47). The iron will be ready for use when
the luminous button (36) turns off. Adjust the amount of
steam with the knob (J) located on the appliance. To work with
steam with the knob (J) located on the appliance. To work with
steam, set a temperature higher than the steam symbol
steam, set a temperature higher than the steam symbol
indicated on the knob (37)
When the steam-ready pilot light (F) comes on, the appliance
will be ready to function with steam (Fig. 47). Press the iron
steam lever button (36) to make steam come out (Fig. 48).
WARNING: the appliance can be equipped with different
types of irons, depending on the supplied equipment or
specifications.
CAUTION!
• Before connecting the iron, switch off the appliance and
unplug the power cable (B).
• Always remove the plug from the socket before connecting
the iron.
• The steam hose (35) must not come in contact with the
soleplate of the iron, sharp or pointed objects.
• Place the iron only on its support (24) (Fig. 49).
• Do not leave the iron unattended when connected to the
appliance.
46

10 IRONING

.
Fig. 44
Fig. 45
Fig. 46
Fig. 47
Fig. 48
Fig. 49
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis