Technical Data - Meec tools 019058 Bedienungsanleitung

SYMBOLS
Read the instructions.
Approved as per applicable
directives.
Safety class II.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Rated voltage
Output
Speed, no load
Mitre sawing
Capacity in wood
Capacity in aluminium
Capacity in plastic
Stroke rate
Stroke length
Attachment
Cord length
Safety class
Sound power level ¹, LwA
Sound pressure level, LpA
Vibration level ², a
h,B
Vibration level ³, a
h,M
¹ Guaranteed, ² in wood, ³ in sheet metal
Always use ear protection!
230 V ~ 50 Hz
800 W
800 - 3000 rpm
0 – 45°
100 mm
10 mm
20 mm
3000/min
20 mm
2 m
100 dB(A), K = 5 dB
89 dB(A), K = 5 dB
8.64 m/s², K = 1.5 m/s²
7.86 m/s², K = 1.5 m/s²
The declared vibration value, which has been
measured by a standardised test method, can be
used to compare different tools with each other
and for a preliminary assessment of exposure.
The measurement values have been determined
in accordance with EN 62841-2-11:2016.
WARNING!
The actual vibration level when using power
tools may differ from the specified maximum
value, depending on how the tool is used.
It is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
Effective and robust jigsaw with 4-stage
oscillation, variable speed control, and
integrated laser guide. Mitre cutting 0-45°
is possible as the aluminium base plate is
variably adjustable. The saw has a rubber
coated machine body with vacuum cleaner
connection, storage compartment for eight
blades and T-attachment with quick-release
lock. Supplied with one saw blade for metal
T
and one for wood.
1. Saw blade
II
2. Slot for parallel fence with locking screws (2B)
3. Splinter guard
4. Blade holder with lock, for tool-free
changing of blades (4B)
5. Laser
6. Knob to adjust oscillation
7. Power switch saw line laser/LED work light
8. Speed control
9. Power switch
EN
31