Herunterladen Inhalt Inhalt Diese Seite drucken

Ryobi RY48RM76A Bedienungsanleitung Seite 9

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or retailer
for recycling advice.
Ukraine Conformity Mark
For indoor use only
Time-lag fuse type
To reduce the risk of injury, the user
must read and understand user's manual
before using this product.
Burst hazard
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Failure to use in dry conditions and to
observe safe practices can result in
electric shock.
Electric shock hazard.
Always unplug the charger from the
power supply before connecting to or
disconnecting from the battery.
Do not expose the product to rain or use
in damp locations.
Keep the product away from all sources
of ignition, sparks, and ames. Do not
cover any ventilation slots, and provide
adequate ventilation during operation.
Keep the product out of the reach of
children or untrained individuals.
Wear eye protection.
The battery pack contains acid. If acid
comes in contact with skin or clothing,
ush immediately with water for 10
minutes.
If liquid gets into your eyes, ush them
with clean water for at least 10 minutes,
then seek immediate medical attention
Non-spillable. Battery must be recycled.
The product contains lead-acid batteries.
Local regulations may prohibit disposal
of lead-acid batteries in ordinary trash.
Consult your local waste authority for
Pb
information regarding available recycling
and/or disposal options.
Stopping the mower
Parking the mower
Stop the mower on a at, level surface.
Do not stop the product on slopes.
Press the blade engage knob to stop the
blades.
Step on the brake pedal to stop the
product.
Step on the parking brake pedal to
engage the parking brake.
Turn the start key to the OFF position.
Remove the start key.
Driving the mower
Mowing in reverse
Insert the start key, and turn it to the ON
position.
Pull up the blade engage knob to activate
the blades.
Step on the accelerator pedal.
Original Instructions
EN
FR
DE
DA
SV
FI
NO
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis