Maintenance And Cleaning; Fibre Filters (Internal And External Filters) / Cleaning Of The Interior Surface Of The Loading Door - Grundig GT55723F6 Bedienungsanleitung

7 Maintenance and cleaning

Read the "Safety Instructions" first!
7.1 Fibre Filters (internal and
external filters) / Cleaning of the
Interior Surface of the Loading Door
The hair and fibres that are separated from the
laundry during drying process is collected by
the Fibre Filter.
After each drying cycle, clean the
fibre filter and the inner surface of
the loading door.
Your drying machine has 2 fibre
filters with one placed inside the
NOTICE
other. Do not operate the product
without the fibre filters.
To clean the fibre filter:
• Open the loading door.
• Hold the first part (inner filter) of the two
part fibre filter and remove it by pulling it
upwards.
• Remove the second part (outer filter) by
pulling it upwards.
60
Ensure that hair, fibre and cotton
balls do not fall into the slot where
the filters are installed.
• Open both of the fibre filters (outer and inner)
and remove the fibres with your hands or
with the brush on the air deflector. You can
clean the hair in the filters with a vacuum
cleaner.
• Clean both filters under water running in
reverse direction of fibre accumulation or
with a soft brush. Dry the filter before placing
it back.
Dryer / User manual