Filling The Tank - Steinbach Pool Professional The Gate Originalbetriebsanleitung

2. Insert the main tank
main or additional tank while you screw it in place with two M8 Allen screws
3. Screw one pipe
cold water connections (blue markings) on both tanks
4
8
7
4. Insert the base
5. Slide the connecting elements
6
1
5
6. The second person holds the shower head
head onto the two tanks
7. The second person holds the shower head
tanks with the M6 Allen screws
5 6
8. Make sure that the vent valve
elements onto the tanks.
3
9. Screw the hose adapter
the main tank
5
The solar shower is assembled.

Filling the tank

To fill the tanks of your solar shower, proceed as follows:
1. Connect a garden hose to the hose adapter
garden hose in such a way that nobody can trip over it.
and the additional tank
5
onto the hot water connections (red markings) and the second pipe onto the
9
into the frame .
8 7
onto the shower head
3
11
.
5 6
is screwed into the additional tank
2
or the inlet valve
15
.
into the frame
6
5 6
5
1
7
15
14
, while you screw the pipe connections of the shower
1
while you screw the shower head onto the two
1
.
11
onto the hose connection and the drain cap
14
and the faucet of the water pipe. Position the
15
. A second person holds the
7
.
12
.
on both sides.
. Slide the connecting
6
1
3
13
into
13
17