Filling The Tank - Steinbach Deluxe Supreme Originalbetriebsanleitung

shower head should point downwards. If screw connections are not water-tight, wrap the thread in
Teflon tape.
To assemble the solar shower, proceed as follows:
2
1. Screw the shower head
2. Place the tank top part
3. Slide the threaded ring
together with the threaded ring.
4
4. Screw the hose adapter
5. Place the O-ring on the drain cap
6. Screw the cold water outlet
The solar shower is assembled.

Filling the tank

To fill the tank of your solar shower, proceed as follows:
7
1. Connect a garden hose to the hose adapter
garden hose so that no one can trip over it.
2. Turn on the water supply faucet. Turn the faucet
this position, the tank fills fastest. Water flows into the tank. It takes approx. 3 minutes for the tank
to fill.
3. As soon as water runs consistently out of the shower head
4. Turn off the faucet of the water pipe.
The tank is filled.
3
1
1
7
9
including the seal onto the tank top part
9
onto the tank bottom part
1
onto the connecting point and screw the top part and the bottom part
2
5
3
4
onto the hose connection.
3
and screw the drain cap into the tank.
4
with the seal into the tank.
6
and the faucet of the water pipe. Position the
3
8
.
1
.
7
all the way to the "hot" position and open it. In
, close the shower faucet.
9
2
6
17