Machine Information; Technical Specifications - VONROC JS501DC Bersetzung Der Originalbetriebsanleitung

EN
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only CD801AA and CD803AA type rechargea-
ble Battery packs with the charger. Other types of bat-
teries may burst causing personal injury and damage.
a) The appliance is not to be used by persons
(including children) with reduced physical, sen­
sory or mental capabilities, or lack of experien­
ce and knowledge, unless they have been given
supervision or instruction.
b) Children being supervised not to play with the
appliance.
c) Do not recharging non­rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!

2. MACHINE INFORMATION

Intended use
The machine is intended for sawing wood, metal,
plastics, ceramics, rubber, etc. to any required size
and in any required shape, while keeping the ba-
seplate resting firmly on the workpiece. A suitable
saw blade must always be used.

TECHNICAL SPECIFICATIONS

This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Batteries
Model No
included
JS501DC
-
S_JS501DC
CD801AA
S2_JS501DC
2 x CD801AA
S3_JS501DC
CD803AA
S4_JS501DC
CD801AA
Machine information
Rated voltage
No load speed
Saw stroke
Max. saw capacity wood 0°
Max. saw capacity steel 0°
8
Chargers
included
-
CD802AA
CD802AA
CD802AA
CD802AA
20V
0-2500/min
25mm
50mm
8mm
Weight
Sound pressure level LPA
Sound power level LWA
Vibration 'sawing sheet metal' 5.459 m/s2 K=1.5 m/s2
Vibration 'sawing plywood'
Model No
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Model No
Battery Type
Voltage
Capacity
Recommended charger
Weight
Only use the following batteries of the VONROC VPO-
WER 20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
1.85 kg
82.0 dB(A), K=3dB(A)
93.0 dB(A), K=3dB(A)
5.658 m/s2 K=1.5 m/s2
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD802AA
220-240V,50Hz 0.4A
21V 2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
CD803AA
Lithium-Ion
20V
4.0 Ah
CD802AA
0.65 kg
WWW.VONROC.COM