NITEHOG VIPER Kurzanleitung Seite 11

4.2.5 Info Box 4.2.5 Info Box
Der Benutzer kann aktuelle Informationen über das Gerät erhalten, wie z.B. die
wichtigsten technischen Merkmale und Firmware-Informationen.
5.2.2.6 Factory Reset 4.2.6 Werkreset 4.2.6 Werkreset
Durch Auswahl und Bestätigung dieser Funktion werden alle Werkeinstellungen des
By selecting and confirming this feature
5.2 Appearance
Geräts wiederhergestellt, einschließlich der Ausrichtung des Vorsatzes.
all factory settings of the device are re-
stored, including the alignment of the
front attachment.
IMAGE
5.2 Appearance
4.3 Modus 4.3 Modus
During the factory reset process, the
user receives information about the
SETTINGS
progress on the display.
4.3.1 Viewer 4.3.1 Viewer IMAGE
MODE
SETTINGS
Modus, in dem das Produkt als Beobachtungsgerät verwendet wird.
EXIT
MODE
Factory Reset Process...
4.3.2 Vorsatz 4.3.2 Vorsatz
EXIT
Ein Modus, in dem das Produkt als Vorsatzgerät verwendet wird.
Um die Schnellfunktion zum Umschalten zwischen Beobachtungs- und Vorsatz-Modus
zu verwenden, halten Sie die Taste
Das Piktogramm zur Anzeige des jeweiligen Modus erscheint für 2 Sekunden in der
Bildmitte.
ATTENTION!
ATTENTION!
When the Menu is activated and the user is inactive for more than 20 seconds, the
By performing the Factory Reset procedure, you will delete all the settings saved on
Menu is automatically deactivated.
the device, including the alignment with the day optical sight!
ATTENTION!
The function is not active in the Alignment and Manual Bad Pixel Replacement
(MBPR) sub-menus.
When the Menu is activated and the user is inactive for more than 20 seconds, the
Menu is automatically deactivated.
The function is not active in the Alignment and Manual Bad Pixel Replacement
NOTE
(MBPR) sub-menus.
To quickly exit the device Menu function, hold down the
more than 3 seconds.
NOTE
To quickly exit the device Menu function, hold down the
more than 3 seconds.
NUC Shutter Automatic Manual External
Settings
Auto BPR
On Off
Viewer
NUC Shutter Manual External
Automatic
Settings
MBPR Confirmation Back
Clip-On
Auto BPR
On
Viewer
Alignment
Main information
MBPR Confirmation Back
about device
Clip-On
Info Box
Alignment
Yes
Factory Reset No
Main information
about device
Info Box
EXIT
Yes
Factory Reset
EXIT
SETTINGS
Brightness
NUC Shutter Automatic Shutter ON
Settings (Internal)
Contrast
Auto BPR
On
Brightness
WH BH
Palette
Contrast
MBPR Confirmation Back
Scene
Highlights Panorama
Type
Exit
WH
Palette BH
Off Alignment
Weather Hot Normal
Type
Weather Weather
Main information
Scene
about device
Highlights
Type
Exit
Filter
On
Info Box
Weather Hot Normal
Type Weather Weather
EXIT
Yes
Factory Reset
Filter
On
und die Taste
EXIT
No
(Brightness) button for
(Brightness) button for
Shutter OFF
(External)
Off
RH
Exit
RH
Wet
Weather
Panorama
Off
Wet
Weather
No
Off
gleichzeitig gedrückt.
25
DE DE
11