Notes On Pir Motion Sensor - Reolink Argus 2E Bedienungsanleitung

Install the Camera with Loop Strap
Place the Camera on a Surface
If you plan to use the camera
indoors and put it on any flat
surface, you may place the
camera into the stand bracket
and adjust the camera angle
by slightly rotating the camera
back and forth.
9 English
Thread the loop strap
through the slots and
fasten the strap. It is the
most recommended
installation method if you
plan to set up the camera
on the tree.

Notes on PIR Motion Sensor

Detection Distance of PIR Sensor
The PIR detection range can be customized to meet your specific needs. You can refer to the
following table to set it up in Device Settings via Reolink App.
Sensitivity Value
Low
0 - 50
Mid 51 - 80
High 81 - 100
NOTE: The detection range would be wider with higher sensitivity but it would lead to more false
alarms. It is recommended to set up the sensitivity level to "Low" or "Mid" when you install the
camera outdoors.
Detection Distance
(For moving and living objects)
Up to 5 meters (16ft)
Up to 8 meters (26ft)
Up to 10 meters (33ft)
English 10