Safety Instructions - BEROTEC CUMPAN Benutzerhandbuch

B E R O T E C

SAFETY INSTRUCTIONS

B a s i c s a f e t y i n s t r u c t i o n s
These operating instructions serve as a basis for using and operating the device in
a safe manner. These operating instructions, in particular the safety notes, must be
observed by all users. Please observe possible restrictions due to applicable coun-
try-specific laws. The user is responsible for proper and safety-compliant installa-
tion and use. No liability is accepted for damage caused during installation or use.
I n t e n d e d u s e
The system is intended for use on vehicles with combustion engines. Cor-
rect function
tion is at the
Installation and operation must be carried out in accordance with these operating ins-
tructions and the intended use. In the event of improper use or non-observance of the-
se operating instructions, no liability will be accepted for any damage that may occur.
B e f o r e i n s t a l l a t i o n
Work on the motorcycle's electrical system may only be carried out with the power sup-
ply disconnected (battery disconnected). If not all electrical plug connections are correctly
connected when the voltage supply is restored, this can lead to an error message or mal-
function on the motorcycle.
Status operating instructions: 10/2021
Contact for queries: info@berotec.de
10
cannot be guaranteed
user's own risk
CUMPAN
for other
and to the exclusion
Deutsch
applications, opera-
of any warranty.