3. Install engine temperature sensor on timing chain tensioner (oil temperature)
Video
»
Replaces the plug of the timing chain tensioner, catch any oil leakage
» Connect the engine temperature sensor plug
» Check seal at full oil pressure!
4. Connect black and white cable (1) for
gear indicator
6-pin connector
(2x 3 pins)
Video
» Connect cable (1) with branch (2) to 6-pin
connector (3)
Cable color: green/brown (4)
» Watch the installation video! Do not use
the flat 6-pin connector (1x 6-pin) of the
throttle body
5. Connect power to ACC2
4
2
3
1
(Behind the lamp mask)
→
red/black (ACC2) to red (CUMPAN)
→
brown (ACC2) to black (CUMPAN)
English
17