Instructions For Button Functions And Operations; Sleep Time Setting - Raddy Rf760 Bedienungsanleitung

Instructions for Button Functions and Operations

1. Install the battery:
Open the battery cover and insert BL5C lithium battery correctly according
to its positive and negative polarity and then cover the battery cover.
After installing the battery, press any key to start the backlight and display
the time.
2. [POWER] Power-on/off/sleep time setting:
2.1 Power on/off function:
After the battery is well installed,
If the backlight is off, press the POWER button twice to turn the radio on.
If the backlight is on, gently switch on the POWER key once and the
radio will be turned on.
Note: In order to reduce the power consumption of the radio, the
backlight of the machine is set to be on for 10 seconds each time any
button or key is pressed. In the power-on state, long press [POWER] to
turn off the radio.

2.2 Sleep time setting:

Time state: long press [POWER] for 2 seconds to display "90" minutes
and start the sleep function; then short press [POWER] to set sleep for
90-80-70-60-50-40-30-20-10 minutes.
After the sleep time is set, LCD display will show
Note: The radio will be automatically turned off after it works to the set
sleeping time. The clock status will also be displayed.
2.3 Enable SNR & RSSI function and time switch display
Radio working state: short press [POWER] to start SNR & RSSI
function and time switch display.
This is a reference value for SNR and receiving sensitivity:
Time status:
08
RF760 Full-Band Radio
.