Creality LD-002R Bedienungsanleitung Seite 3

Notes
1. Do not use the printer any way other than described herein to avoid personal injury
or properly damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We
suggest placing in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this
may cause poor print quality.
4. Please use recommended resin to in case damage of machine.
5. Do not use any other power cable except the once supplied. Always use a grounded
three-prong power outlet.
6. Please do not open the plastic cover during usage, otherwise the printing will be
interrupted.
7. Do not wear cotton gloves when operating the printer. Such cloths may become
tangled in the printers moving parts leading to burns, possible bodily injury, or printer
damage.
8. Please wait a moment after the print is finished. And please wear gloves to take out
the print by tools.
9. Clear the printer frequently. Always turn the power off when cleaning and wipe with a
dry cloth to remove dust, adhered printing plastics or any other material of the frame,
guide rails or wheels. Use glass cleaner or isopropyl to clean the print surface.
10. Children under 10 years should not use the printer without supervision.
Equipment Introduction
1) Hexalobular socket screw
2) Leveling screw
3) Platform plate
4) Hexalobular socket screw
5) Resin vat
6) Touch screen
7) Metal power switch
8) Limit sensor
9) Air filter
10) Power socket
11) 5.5-inch screen port
12) USB port