Troubleshooting; Technical Data; Protecting The Environment - Black & Decker GL7033 Anleitung

Troubleshooting

If your tool seems not to operate properly, follow the instruc-
tions below. If this does not solve the problem, please contact
your local Black & Decker repair agent.
Warning! Before proceeding, unplug the tool.
Tool runs slowly
Check that the spool housing can rotate freely. Carefully
u
clean it if necessary.
Check that the cutting line does not protrude more than
u
11 cm from the spool housing. If it does, cut it off so that it
just reaches the line trimming blade.
Automatic line feed does not work
Keep the tabs depressed and remove the spool cover
u
from the housing.
Pull the cutting line until it protrudes 11 cm from the hous-
u
ing. If insufficient cutting line is left on the spool, install a
new spool of cutting line as instructed above.
Align the tabs on the spool cover with the cut outs in the
u
housing.
Push the cover onto the housing until it snaps securely
u
into place.
If the cutting line protrudes beyond the trimming blade, cut
u
it off so that it just reaches the blade.
If the automatic line feed still does not work or the spool is
jammed, try the following suggestions:
Carefully clean the spool cover and housing.
u
Remove the spool and check if the lever can move freely.
u
Remove the spool and unwind the cutting line, then wind it
u
on neatly again as described above. Replace the spool as
instructed.

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
(Original instructions)
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com

Technical data

GL7033
(Type 1)
Voltage V
230
AC
Power input
W
700
-1
No-load speed min
7000
Weight
kg 3.2
Level of sound pressure:
Sound pressure (L ) 80 dB(A), uncertainty (K) 2 dB(A)
pA
Sound power (L ) 94 dB(A), uncertainty (K) 2 dB(A)
WA
Vibration total values (triax vector sum) according to EN 786:
2
Vibration emission value (a ) 8.2 m/s , uncertainty (K) 1.5 m/s
h
ENGLISH
GL8033 GL9035
(Type 1) (Type 1)
230 230
800 900
7000 7000
3.2 3.2
2
9